Kegboard Pro Mini Troubleshooting¶
General issues¶
Kegboard POWER LED does not light¶
If the POWER LED is not lighting, double check your power source and USB cable.
If still not lighting, contact support.
Kegboard CHIP LED interval¶
If the CHIP LED flashes and decays on a 5-second interval even when plugged into an Android tablet, double check that your tablet supports USB Host Mode.
If you’re sure USB Host Mode is supported and enabled, try using a different USB OTG Power-Y cable or a USB OTG connector in conjunction with a USB Splitter with power supplied on one of the female inputs.
No flow data / LEDs do not blink¶
Remember that the flow sensor is directional; are you sure you have connected the sensor in the right dirction? Refer to the note at connect-meter.
We are not responsible for troubleshooting flow sensors other than the Kegbot SF800-RJ.
Next: Changelog
Previous: Firmware